{"product_id":"modded-logitech-g-pro-x-superlight-2-pcb-gpx-2","title":"Modded Logitech G Pro X Superlight 2 PCB (GPX 2 and GPX 2 DEX)","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*There is a 1 week build time on all modded PCB's*\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eReplace the Logitech G Pro X Superlight 2 and G Pro X Superlight 2 DEX (GPX2, GPX2 DEX) optical switches with mechanical switches by replacing the stock PCB with this modded PCB. Many people have complained about the heavy and mushy feeling that the optical switches of the GPX 2 provide so by installing a modded PCB you can choose from a range of different mechanical switches to tune the mouse clicks and encoder how you see fit.\u003c\/p\u003e\u003cp\u003eHot-Swappable sockets option - If you choose this option the PCB will come with hot swap sockets, middle mouse button, and an encoder soldered in. The hot swap sockets allow you to pull out and install switches without the need to solder (applicable to standard 3 pin mechanical switches only). Please be aware that due to the nature of these sockets the switches might not sit perfectly against the PCB and can effect how they feel (some people prefer the soldered option as it ensures the switches sit perfectly flush with the PCB and also will not move\/wiggle during operation).\u003c\/p\u003e\u003cp\u003eThe ordering process:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eChoose your desired switches, encoder, and optional mouse feet\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe components you have chosen will be added to your cart and ready for checkout. (do not remove any components from your cart or they will not be supplied)\u003c\/li\u003e\n\u003cli\u003eUsing your chosen components and an upgraded Kailh middle mouse button we will assemble\/solder your modded PCB together and test it's functionality\u003c\/li\u003e\n\u003cli\u003eWe ship the modded PCB to you ready for installation!\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eHow to install (there are also plenty of Youtube tutorials in how to open and take out the G Pro X Superlight 2 switch PCB):\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eRemove top and bottom mouse feet\u003c\/li\u003e\n\u003cli\u003eRemove the 6 screws under the mouse feet\u003c\/li\u003e\n\u003cli\u003eCarefully remove the flat ribbon cable by lifting the tab on the base PCB connector (it should easily pull out after this)\u003c\/li\u003e\n\u003cli\u003eCarefully remove the battery cable from the base PCB\u003c\/li\u003e\n\u003cli\u003eCarefully un-stick and remove the battery from inside the top shell (a flat plastic instrument such as a knife will help with this)\u003c\/li\u003e\n\u003cli\u003eRemove the 4 screws under the top shell that hold in the M1 and M2 clicks\u003c\/li\u003e\n\u003cli\u003ePull out the M1 and M2 clicks revealing the stock click\/encoder PCB\u003c\/li\u003e\n\u003cli\u003eRemove the small flat ribbon cable by pushing the left and rise side tabs of the connector (it should easily pull out after this)\u003c\/li\u003e\n\u003cli\u003eRemove the 4 screws holding the stock PCB down\u003c\/li\u003e\n\u003cli\u003e*notice the small metal clip holding down the scroll wheel!* Lift the stock PCB out of the mouse careful not to remove or pop-off the small metal clip\u003c\/li\u003e\n\u003cli\u003ePull the scroll wheel out of the stock PCB and transfer into your new modded PCB\u003c\/li\u003e\n\u003cli\u003eCarefully lift up the small metal clip and install the modded PCB (the small clip should be putting tension down onto the scroll wheel as it did previously)\u003c\/li\u003e\n\u003cli\u003eFix the modded PCB to the shell with the 4 screws and reinsert the ribbon cable by first inserting it into the connector and then pushing down on both sides of the tab. (note the ribbon cable does not push all the way into the connector, some of the gold contacts will stick out the end which is normal).\u003c\/li\u003e\n\u003cli\u003eslide the M1 and M2 clicks back into the shell and screw in\u003c\/li\u003e\n\u003cli\u003ePush the battery back into place to ensure good adhesive contact\u003c\/li\u003e\n\u003cli\u003eput the flat ribbon cable into the base PCB connector and close down the tab to fix it in place\u003c\/li\u003e\n\u003cli\u003eplug the battery connector into the base PCB\u003c\/li\u003e\n\u003cli\u003eput the base and top shell back together and screw 6 screws back into place\u003c\/li\u003e\n\u003cli\u003e TEST! turn your mouse on and test that all clicks and scrolling work correctly. (do this before installing your mouse feet)\u003c\/li\u003e\n\u003cli\u003eIf your mouse is functioning correctly install your new mouse feet and enjoy your modded gaming mouse!\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eApplication - Logitech G Pro X Superlight 2 (This will NOT fit the original Logitech G Pro Wireless or G Pro X Superlight 1)\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuantity - 1 modded PCB\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Product page is for 1 PCB only and does not include a mouse.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Ausmodshop is not responsible for any damaged caused by you to your mouse during the modification\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*As this is a custom made to order product we do not accept any returns, refunds, and\/or exchanges\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e*Mouse is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1 year warranty\u003c\/strong\u003e\u003c\/p\u003e","brand":"mysite","offers":[{"title":"Soldered Switches","offer_id":44888665292859,"sku":"MODDEDPCB-SUPERLIGHT2","price":22.4,"currency_code":"USD","in_stock":true},{"title":"Hot-Swap Sockets","offer_id":44888665325627,"sku":"MODDEDPCB-SUPERLIGHT3","price":25.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/7386\/6811\/files\/AusmodshopLogitechGProXSuperlight2GPX2moddedPCB.jpg?v=1793930998","url":"https:\/\/aimglide.store\/products\/modded-logitech-g-pro-x-superlight-2-pcb-gpx-2","provider":"AIMGLIDE","version":"1.0","type":"link"}